2026/04/12

Brenda reverse solenoid issues

see ep3 doc page 233 normaly it goes to b7 for power it's connected.

we need vss!!

does it come from the tach ? the tach works..

vss goes to b22 (e3 connector ) on the stock ecu so trace this https://www.spyderchat.com/attachments/spyderb_zps15ba51df-jpg.59314/
v-w (

where does b22 go to?

Violet with a White stripe (V-W)

found it

what to hook it up to ?

it should be C101 wire 3 to A18 per file:///C:/Users/alextrull/Documents/Doctronic/Brenda/K-Swap%20Harness.pdf page 6

C101 bypassed

B22 violet and white wired to A18 white and green using but connector

VSS works and 5/6 work fine

now we have problems with cam sensor

and no IAT signal either

IAT fell out (fixed)

ECU connectors cleaned with 96% alcohol spray to give CAM control back